814-535-3505
Request A Quote

Download Our Parylene 101 Guide: Coating Facts Sheet

Download our Parylene 101 Guide

Parylene conformal coating is becoming an ever increasing part of everyday life for the defense, bio-medical, and other industries. Download Diamond-MT's Parylene 101: Coating Facts Sheet to understand the basic facts on the process.

Receive your instant download of the Parylene 101 Guide now by filling out this simple form.

Parylene for Aerospace
Parylene for Electronics
Parylene for Military
Parylene for Medical
Parylene for Aerospace
Parylene for Electronics
Parylene for Military
Parylene for Medical
Get Started: Request a Quote Learn More About Parylene

Parylene Coating Services

Our process is clear and straightforward, ensuring the best possible end product.

Parylene Process - Planning

Planning

Since our beginning, Diamond MT has established a reputation for providing the highest quality services in the industry. Our commitment to quality, integrity and customer satisfaction combined with an unmatched expertise in applications and processes has provided every one of our customers with superior results. Diamond MT’s quality manual ensures every employee is focused on continuous improvement and service excellence.

Parylene Process - Development

Development

Diamond MT understands and realizes that often times conformal coating is overlooked due to the fact that it is the last step in the process. We are committed to serving the industry with rapid turn times for parylene, (normally 10 business days) with expedited service in as little as 2-5 business days depending upon the complexity and quantity.

Parylene Process - Production

Production

Diamond MT operates out of a freestanding 12,000 square foot building located 60 miles southeast of Pittsburgh. Diamond MT is located near three major interstates and is supported by the Cambria County Airport, which serves as a primary freight terminal for south central Pennsylvania. Diamond MT maintains a strict program per NSI ANSI Standard 20.20 for ESD protection.

Request A Quote

Parylene Conformal Coating

Parylene is a series of polymers from paraxylene and is considered by many to be the ultimate conformal coating. Parylene is unique in being created directly on the surface at room temperature. It is chemically stable and makes an excellent barrier material, and has excellent thermal endurance, great mechanical properties and high tensile strength. For more information about parylene services and coating, contact Diamond MT, your parylene conformal coating services provider.

Properties of Parylene Coating

Parylene coating has many advantageous properties that make it one of the top coating options. These properties include:

  • Uniform conformal thickness: Coatings are truly conformal, have a uniform controllable thickness and are completely pinhole-free at thicknesses greater than 0.5 micrometers (µ), or 0.25 to 1 millimeter (mm). This property is achieved by a unique vapor deposition polymerization process in which the coating is formed from a gaseous monomer without and intermediate liquid stage. As a result, component configurations with sharp edges, points, flat surfaces, crevices or exposed internal surfaces are coated uniformly without voids.
  • Purity: No initiators or catalysts are involved in the polymerization, so the coating is very pure and free from trace ionic impurities. It also does not promote biological growth, like bacteria, which keeps the coating sterile.
  • Chemical barrier: Parylene is chemically and biologically inert and stable and makes excellent barrier material that exhibits a very low permeability to moisture and gases. It does not immediately react with other chemicals and substances and is insoluble in all organic solvents.
  • Excellent electrical properties: Parylene has a low dielectric constant and loss with good high-frequency properties. It also has good dielectric strength and high bulk and surface resistance.
  • Good thermal endurance: Parylene C performs in air without significant loss of physical properties for 10 years at 80°C and in the absence of oxygen to temperatures in excess of 200°C.
  • Great mechanical properties: Parylene coating has excellent mechanical properties, including high tensile strength.
  • Biocompatibility: Parylene conformal coating is safe for use in the human body, so it's used on medical devices that need protection within the body to work correctly. The coating complies with the United States Pharmacopeial (USP) XXII Class VI plastics requirements and biocompatibility rating.
  • Dry lubricity: There is no liquid phase involved. Parylene conformal coating is a dry film lubricant that does not need liquid release agents. Since it doesn't have a liquid phase, it has no curing time.

Benefits of Parylene Conformal Coating

The benefits of parylene coating include:

  • Temperature stability: Parylene is stable over a very wide temperature range (minus 200 degrees C to 200 degrees C), allowing the chamber items coated in parylene to be put in an autoclave.
  • Complete protection: Parylene coating completely penetrates spaces as narrow as 0.01 mm, so the entire surface of the device is protected from conditions like dust, chemicals, moisture, dirt, fumes, gases, saltwater, corrosion, fungus and other environmental conditions.
  • No stress: The room temperature formation process of parylene coating means the coatings are effectively stress-free. This benefit ensures the coating will provide maximum performance for a long time.
  • Solvent resistance: Parylene is unaffected by solvents, has low bulk permeability and is hydrophobic. Parylene conformal coatings easily pass a 100 hour (hr) salt-spray test.
  • Clear for visibility: Parylene is transparent and can be used to coat optical elements. Its clearness and thinness make it invisible to the human eye.
  • Lightweight: Parylene coating has minimal mass, so it will not contribute additional weight to the final product.
  • FDA approval: The Food and Drug Administration (FDA) approval of parylene-coated devices is well documented.
  • MIL and IPC listings: Parylene conformal coating is military (MIL)-I-46058C and Institute of Printed Circuits (IPC)-CC-830B listed.
Parylene Coating Applications

Parylene Coating Applications and Industries

Parylene coating has a wide range of potential uses. It is used for the protection of devices, components and surfaces in the automotive, military, electronics, instrumentation, aerospace, medical and engineering industries.

Here is a brief list of some of the items that can be parylene coated:

Printed circuit boards (PCBs) Microelectromechanical systems (MEMS) Light-emitting diodes (LEDs)
Catheters Stents Magnets
Pacemakers Defibrillators Hearing aids
Paper Needles Sensors
Ferrite cores Metallic blocks Optical lenses
Implantable devices Valves O-rings
Tubing Silicon wafers Keypads
Stoppers Seals Mandrels
Molds Motor assemblies Power supplies
Backplanes Photoelectric cells Forceps
Test tubes Probes Fiber optic components
Pace-makers Bobbins Elastomers
Plus many more...

The Coating Process for Parylene Conformal Coating

Mastering the parylene coating process requires detailed attention to preparation, deposition, and coating procedures.

Pre-Deposition

Preparing for the deposition (application) involves thoroughly inspecting incoming items to-be-coated, verifying their quantity and condition. Preparation procedures are enacted as necessary. For instance, cleaning/cleanliness-testing, or similar unique processes, are commenced, followed by masking of connectors and electrical components. Accumulated substrate contaminants diminish adhesion, so assuring appropriate levels of surface cleanliness is integral to parylene coating.

Depending on the substrate surface, cleaning may be enacted manually or through the application of batch, inline or ultrasonic methods. Most materials (glass, metal, plastic, etc.) require treatment with A-174 silane to effect appropriate surface modification before parylene application. Typically, doing so employs either manual-spray, soaking or vapor-phase technology. Applied after the masking operation, A-174 silane's molecule forms a unique chemical bond with the substrate's surface, sufficient to improve parylene adhesion.

Masking is exceptionally labor-intensive. Exceptional care is required to ensure every connector is effectively sealed, so gaseous parylene molecules do not penetrate their surfaces. All tape or other covering materials must thoroughly encompass the keep-out regions, without gaps, crevices or other openings, to ensure connector function is retained after coating.

Further inspection assures masking is in compliance with customers' specifications.

The diversity of adhesion promotion methods requires a similarly diverse list of raw materials. Establishing best adhesion practices is only part of mastering the parylene coating process; once established, strict adherence standards need to be reliably enforced to ensure the quality of the conformal coatings. Using industry best practices, such as substrate cleansing and A-174 silane application, appropriately combined with standard, repeatable processes, will ensure strong adhesion for parylene coating. Adhesion promotion methods are typically used prior to the actual coating process. However, some can be integrated during the process itself.

The Parylene Deposition Process

Relatively easy to understand, the parylene deposition process can be difficult to implement, particularly with respect to controlling coating thickness and otherwise ensuring a successful coating cycle.

Because coating type and required surface thickness vary according to substrate material and coating-project, deposition rates fluctuate. Processing can require less than an hour or more than 24 hours, at a deposition rate of about 5 microns per hour. While this slower rate of substrate covering generates parylene's superior conformal coating, compared to other coating options, it also adds to its cost. Mastering the parylene coating process helps ensure these production expenditures are diminished.

Parylene's complex and specialized vapor-phase deposition technique ensures the polymer can be successfully applied as a structurally continuous film, entirely conformal to the characteristics of the selected substrate. To correctly master the process, assure each incoming order possesses all pertinent information affecting parylene application. This information will include drawings, specifications and special instructions that distinguish the order from others, allowing the creation of customized solutions for the particular item.

Parylene's deposition process completely eliminates the wet deposition method used by such other coating materials as epoxy, silicone or urethane. It begins in a chemical-vacuum chamber, with raw, powdered parylene dimer placed in a loading boat and inserted into the vaporizer. The dimer is initially heated between 100º - 150º C, converting the solid-state parylene into a gas at the molecular level. The process requires consistent levels of heat; the temperature must increase steadily, ultimately reaching 680º C, sublimating the vaporous molecules and splitting it into a monomer.

Drawn by vacuum onto the selected substrate one molecule-at-a-time in the coating chamber, the monomer gas reaches the final deposition phase, the cold trap. Here, temperatures are cooled drastically to levels sufficient to remove any residual parylene materials pulled through the coating chamber from the substrate, between -90º and -120º C.

Types of Parylene Coating

There are four common types of parylene coating, all of which are available at Diamond MT:

  • Parylene N: This type is linear and has high crystalline content. It has a low dissipation factor with high dielectric strength. Its main benefit is the ability to get into narrow crevices due to its high molecular activity during deposition.
  • Parylene C: This type is made from the same dimer (raw material) as Parylene N and is different with an additional chlorine atom instead of an aromatic hydrogen. It has a quick deposit rate and an excellent barrier, physical and electrical properties. Parylene C has low permeability for corrosive gases and moisture.
  • Parylene D: Parylene D is made with hydrogen, carbon and two chlorine groups. Its properties are similar to Parylene C but it has a higher temperature range. Though it offers the same surface resistivity as Types N and C, it has a lower dielectric strength.
  • Parylene F: Parylene F is fluorinated and can lower coating capacitation to reduce the surface's electrical charge. It has a low dielectric constant and good thermal stability.

Coating Requirements

The parylene coating is applied through the deposition process described above. Once coating has been deposited, masking materials are removed; extreme caution must be exercised not to damage the thin layer of applied parylene.

An important consideration of appropriate parylene thickness is total required clearance. While an enclosure-PCB has few clearance issues, in many cases even an additional millimeter of parylene coating can be sufficient to generate dysfunctional mechanical abrasion, damaging the parylene surface and reducing its conformal qualities.

Regarding dielectric strength, items whose required levels of dielectricity are higher will need a thicker coat of parylene. Balancing dielectric strength with clearance generally requires quality testing to determine their correct ratio. The end-item customer may not always provide these specifications; learning how to determine dielectric/clearance ratios without this data is integral to mastering the parylene deposition process.

The coating process must generate a conformal covering explicitly meeting the customer's precise specifications. If changes are necessary, making them to order and on time are essential elements of mastering the parylene coating processes. A final inspection ensures successful completion of all process phases, and that the final product complies with the customer’s drawings and specifications.

Parylene Disadvantages

The raw material, parylene dimer, is rather expensive ranging from $200-$10,000+ per pound. Because parylene is applied through a vapor deposition process, everything, including items that do not need to be coated like inner diameter of the chamber, gets coated. This makes parylene an inherently inefficient process and wasteful with materials, which escalates the end cost to the customer.

Masking and otherwise prepping an article for parylene coating can be a labor intensive affair. Because parylene is applied as a vapor, it literally gets everywhere that air can. Our operators and quality inspectors must take this into account prior to coating to ensure that every one of the customer’s coating free areas are just that.

One major issue that often comes up for several of our high volume manufacturers is the limited throughput of parylene. Runs of the parylene machine can take anywhere from eight to over twenty-four hours. As a result of the limited chamber space, there is a fixed amount of product that can be processed during one coating cycle. This, coupled with the high capital cost of new equipment, can wreak havoc with our internal and our customer’s delivery schedules.

One final disadvantage of parylene to consider is the poor adhesion to many metals. Parylene has always had poor adhesion to gold, silver, stainless steel and other metals. Many printed circuit board manufacturers use gold in their products because of its conductivity. While there are some adhesion promotion methods that will greatly improve adhesion to these metals, they are either material or labor heavy and can increase costs significantly.

Parylene Coating Removal

Parylene coating removal can be broken down into three categories for removal of parylene coating:

1) Chemical Removal: Parylene coatings are sought after primarily for their chemical resistance. Parylene resists room temperature chemical attacks and are insoluable in all organic solvents up to 150C. Thus parylene is highly chemical resistant and no chemical can dissolve it at room temperature.

However, Tetrahydrofuran is an organic solvent that can soften the coating, temporarily loosening the adhesion bond between the coating and the substrate so that it can be lifted off, like a mask, with tweezers. It is not suited to working with specific areas; in the case of rework and repair this is usually desired. It is highly flammable, caustic and extreme measures must be taken to ensure safe use.

2) Thermal Removal: All parylene variants demonstrate heat-resistance or "melting point" constraints for removal purposes ranging from 290C for parylene C, the most commonly used variant, to temperatures approaching 500C for parylene D, N, and F. A high quality soldering iron under a vacuum hood could be used to burn off at the solder points. This approach might be effective for small repairs though it is not the cleanest method. Along with residues, discoloration may pose a risk to heat sensitive components or substrates.

Laser ablation removes material from the surface by irradiating it with a laser beam. The beam can drill, cut, or mark delicate materials with great precision and repeatability.

Laser ablation removes very precise areas and tends to fit high density difficult to mask parts. Applications such as microelectronics, electrosurgical devices and implantable elctrodes that require very small, precise and intricate shapes to be free would be ssuited to this approach. It is less likely to be used for the purpose of general rework as it can be cost restrictive.

3) Mechanical Removal: Parylene demonstrates poor resistance to abrasion. Parylene is a soft polymer and as such physical or mechanical means is the best method for removal. Using coarse methods such as picking, scraping and cutting can be effective but there is a risk of damage to delicate trace lines, solder pads, components and the substrate itself.

The most common method to remove parylene is via micro-abrasion. This is the fastest, economic, and ecologically safe method for both spot and whole board parylene coating removal. Various media from glass beads, plastic beads, sodium bicarbonate, and wheat starch have been tested and used. Everything from complex to desktop equipment are available and can be used with a hand held stylus directing pressurized air and abrasive media.

Once the section is repaired, the specific area could be covered with other protective material. However, for optimum protection the whole board should be recoated with parylene.

Parylene Removal
facts icon

Parylene Facts

Here are some facts about parylene conformal coating:

  • There is no liquid phase involved. Coatings are truly conformal, have a uniform controllable thickness and are completely pinhole-free at thicknesses greater than 0.5 µ. This property is achieved by a unique vapor deposition polymerization process in which the coating is formed from a gaseous monomer without and intermediate liquid stage. As a result, component configurations with sharp edges, points, flat surfaces, crevices or exposed internal surfaces are coated uniformly without voids.
  • Parylene coating completely penetrates spaces as narrow 0.01 mm.
  • Parylene coating has excellent mechanical properties, including high tensile strength.
  • Parylene is stable over a very wide temperature range (-200 ‘C to +200 ‘C), allowing the chamber items coated in parylene to be put in an autoclave.
  • FDA approval of parylene-coated devices is well-documented. The coatings comply with USP Class VI Plastics requirements and are MIL-I-46058C / IPC-CC-830B listed.

Our Parylene Coating Services

If you are looking for parylene coating services near you, choose Diamond MT, your parylene coating company in Pennsylvania and Florida. We provide quality coatings for medical implants, electronics and other devices that need the protection and durability of parylene.

Our team uses a proven deposition technique for application to reduce consistent results for each device. We can also rework and remove your existing parylene coating with chemical, thermal or mechanical means.

Industries We Serve

  • Military
  • Electronics
  • Automotive
  • LEDs
  • Medical
  • MEMs

Diamond MT has provided parylene coating services since 2006 in our Aerospace Standard (AS) 9100D and International Organization for Standardization (ISO) 9001:2015 certified facilities. Complete our contact form for more information or request a quote online.

facts icon

Parylene Equipment

The parylene coating process is controlled via a programmable logic controller (PLC). Each deposition system features an operator’s control panel that displays critical factory pre-programmed process parameters. Process settings are accessible and can be changed by qualified personnel when necessary.

All machines feature closed-loop monomer pressure control, ensuring the deposition of the polymer film at a precise rate. All operating temperatures and pressures are continuously monitored, and any deviation from the acceptable limits results in audible and visual alarms. Automatic process shutdown is initiated following process fault conditions of sufficient duration.

Diamond MT can help you discover the best equipment solutions for your specific needs. We work with you to ensure that you are getting the most cost-effective solution for your product, whether that is parylene coating solutions, bringing equipment in house or another type of conformal coating.

Parylene Solutions for Every Industry

There are many different industries that conformal coating plays a critical role in.

Parylene Solutions for Aerospace
Defense / Aerospace
Parylene Solutions for Electronics
Electronics
Parylene Solutions for Automotive
Automotive
Parylene Solutions for LEDs
LEDs
Parylene Solutions for Medical
Medical
Parylene Solutions for MEMs
MEMs

Download Our Parylene 101 Guide: Coating Facts Sheet

Download our Parylene 101 Guide